How to Install Twido Modbus Driver for Windows 10
If you are using a Twido programmable logic controller (PLC) and want to communicate with it using the Modbus protocol, you will need to install a Modbus driver for your Windows 10 computer. The Modbus driver will allow you to use various Schneider programs, such as TwidoSuite, Advantys, and PL7, to configure and monitor your Twido PLC.
Twido Modbus Driver For Windows 10
Download Zip: https://venemena.blogspot.com/?download=2tGdJT
However, Twido is an obsolete product and has been replaced by the M221 PLC and the EcoStruxure Machine Expert Basic software (formerly TwidoSuite). The latest version of TwidoSuite, version 2.31.4, only supports Windows 7 64 bit. Therefore, if you want to use TwidoSuite on Windows 10, you will need to run it in compatibility mode or use a virtual machine.
Alternatively, you can migrate your Twido program to the M221 PLC and use the EcoStruxure Machine Expert Basic software, which is compatible with Windows 10. You can import your old Twido program into Machine Expert Basic and load it into the M221 PLC. This way, you can benefit from the enhanced features and performance of the new PLC and software.
In this article, we will show you how to install the Modbus driver for Windows 10 that supports both the TSXCUSB485 USB cable and the TSXPCX1031 serial cable. These cables are used to connect your computer to your Twido PLC. We will also show you how to run TwidoSuite in compatibility mode on Windows 10.
Step 1: Download the Modbus Driver
The Modbus driver that you need is called SchneiderModbusDriverVista32.exe. It is available as an attachment in this web page[^1^]. This executable file includes:
The Modbus driver
The USB bus Windows driver
The virtual serial port Windows driver
Note: This executable file is also found in the Schneider V2.6+ drivers pack.
Step 2: Install the Modbus Driver
Once you have downloaded the SchneiderModbusDriverVista32.exe file, double-click on it to run it. Follow the instructions on the screen to install the Modbus driver and the other components. You may need to restart your computer after the installation is complete.
Step 3: Connect Your Cable and PLC
After installing the Modbus driver, you can connect your TSXCUSB485 or TSXPCX1031 cable to your computer and your Twido PLC. Make sure that your PLC is powered on and that you have selected the correct communication settings on both ends.
Step 4: Run TwidoSuite in Compatibility Mode
If you want to use TwidoSuite on Windows 10, you will need to run it in compatibility mode for Windows 7. To do this, follow these steps:
Right-click on the TwidoSuite shortcut or executable file and select Properties.
Go to the Compatibility tab and check the box that says \"Run this program in compatibility mode for:\".
Select Windows 7 from the drop-down menu.
Click Apply and OK.
Double-click on the TwidoSuite shortcut or executable file to launch it.
You should now be able to use TwidoSuite on Windows 10 with your Twido PLC.
Conclusion
In this article, we have shown you how to install the Modbus driver for Windows 10 that supports both the TSXCUSB485 and TSXPCX1031 cables. We have also shown you how to run TwidoSuite in compatibility mode on Windows 10. However, we recommend that you migrate your Twido program to the M221 PLC and use the EcoStruxure Machine Expert Basic software instead, as they offer better features and performance than the obsolete Twido products. 29c81ba772