How to Use BMW INPA 3.01 with DIS SSS and DIAG HEAD
BMW INPA 3.01 is a powerful diagnostic software for BMW vehicles that can perform various functions such as reading and clearing fault codes, coding and programming modules, testing sensors and actuators, and displaying live data. However, to use BMW INPA 3.01 effectively, you need to have some additional tools and software, such as DIS SSS and DIAG HEAD.
How to Use BMW INPA 3.01 with DIS SSS and DIAG HEAD
DIS SSS is a service and repair software that can access the vehicle's electronic control units (ECUs) and provide detailed information about their status, parameters, and functions. DIAG HEAD is a hardware interface that connects the vehicle's diagnostic socket to the computer running INPA. Together, they form a powerful combination that can perform advanced diagnostics and programming on BMW vehicles.
In this article, we will show you how to use BMW INPA 3.01 with DIS SSS and DIAG HEAD with instuctions. We will assume that you have already installed INPA 3.01 on your computer and have a working DIAG HEAD interface. If not, you can download them from the links below:
BMW INPA 3.01 DIS SSS And DIAG HEAD With Instuctions [^1^] [^4^]
uTorrent [^5^]
Before you start, make sure that your computer meets the minimum requirements for running INPA 3.01 and DIS SSS:
Windows XP or higher (32-bit or 64-bit)
At least 2 GB of RAM
At least 20 GB of free disk space
A DVD drive or a virtual drive software
A USB port for connecting DIAG HEAD
Now, follow these steps to use BMW INPA 3.01 with DIS SSS and DIAG HEAD with instuctions:
Insert the DVD containing DIS SSS into your computer's drive or mount it using a virtual drive software.
Open the DVD folder and run the setup.exe file.
Follow the on-screen instructions to install DIS SSS on your computer. You may need to restart your computer after the installation.
Connect DIAG HEAD to your computer's USB port and to your vehicle's diagnostic socket.
Turn on the ignition of your vehicle but do not start the engine.
Open INPA 3.01 on your computer and select your vehicle model from the main menu.
Select \"F4 ECU\" to access the list of available ECUs on your vehicle.
Select the ECU that you want to diagnose or program from the list.
Select \"F9 Execute Job\" to start the communication between INPA and the ECU.
Select \"F8 Control Unit Functions\" to access the various functions that you can perform on the ECU, such as reading fault codes, coding, programming, testing, etc.
Select the function that you want to perform and follow the on-screen instructions.
When you are done, select \"F10 End Service Function\" to exit the function.
Select \"F1 Back\" to return to the ECU list or \"F12 Back\" to return to the main menu.
Repeat steps 7-13 for any other ECUs that you want to diagnose or program.
When you are finished, turn off the ignition of your vehicle and disconnect DIAG HEAD from your computer and your vehicle.
Congratulations! You have successfully used BMW INPA 3.01 with DIS SSS and DIAG HEAD with instuctions. You can now enjoy the benefits of having a powerful diagnostic tool for your BMW vehicle. 04f6b60f66